How To Make A Glowing Concrete Table Or Countertop

FOLLOW THE STEPS BELOW TO ADD AGT™ GLOW STONES IN A POLISHED CONCRETE SURFACE!

Looking for a way to add a unique glow to your home? Create your own glowing concrete table or countertop by adding AGT™ Ultra Grade Glow Stones.

STEP-1: Pour concrete.

STEP-2: Make it all level using a wood screed.

Levelling out the concrete using a wood screed.

STEP-3: Hit the sides of the wood mold with a rubber hammer to assist in removing air bubbles from within the concrete.

Hammering out the sides of the wood mold with a rubber hammer to remove air bubbles from within the concrete

STEP-4: Once the concrete begins to cure and it is no longer ‘soupy’ - hand apply the AGT™ Glow Stones on to the top of the concrete surface and trowel them in.

Hand applying the AGT™ Glow Stones on to the top of the concrete surface.

Towelling in the AGT™ Glow Stones on to the top of the concrete surface.

STEP-5: Once the concrete has cured. Wet Polish it using wet diamond pads. Start with 100 grit to expose the glow stones and then move to 200 grit and then 400 grit.