AGT is a high performance, non-toxic, photoluminescent aggregate specially formulated and manufactured in the USA for the Decorative Concrete, Cement, Terrazzo, Stucco and Floor Epoxy trades.

How To Apply AGT™ Stone Products

Hand-broadcasted/seeded onto concrete or epoxy surfaces similar to seeding color flakes and recycled glass.*
Spray adhesive on the inside of your Form then seed with AGT stone or sand.
Mixed directly into stuccos and overlay mixes.
Ground and polished to any level of finish from ext. pathway 100 grit to mirror 3000 grit.
Sealed as you would usually seal your cement/concrete projects.
This product works VERY WELL with BOTH water AND solvent-based mixes.

How To Apply AGT™ Sand Products

Specially formulated for epoxy flooring, stucco, and Cementitious overlay applications.

Hand-broadcasted/seeded onto epoxy similar to seeding color flakes.*
Spray adhesive to the inside of a concrete/cement form and 'seeded'.
Mixed directly into stuccos and topcoat mixes.
Ground and polished to any level of finish from ext. pathway 100 grit to mirror 3000 grit.
Sealed as you would usually seal your cement/concrete projects.
This product works VERY WELL with solvent-based mixes and epoxies for example.

*AGT™ Sand and Powder loading ratios vary based on required glow intensity and duration. It is suggested that you create sample panels or boards to establish the level of glow they would like to achieve.